The replica cycle but no ball comes out
The mechanism works, we hear the shooting, but nothing comes out of the gun: charger or stuffing.
- Verifications
- 5
- Until
- Dismantling
- Tools
- 3
Symptoms
- Normal shooting noise, no ball
- A ball comes out from time to time only
- A ball is visible in the room or stuck in the cannon
Causes
Most common to rare.
- Empty loader, hi-cap not mounted or poorly engagedCommon
- Bill stuck in the hop-up room (definition) or cannonCommon
- Hop-up (definition) too tight: it blocks the ball instead of brake itPossible
- Deformed, dirty or of poor qualityPossible
- Nozzle (definition) broken or not falling back enoughRare
Verifications
In the order: we start with what does not require anything to disassemble. Check as you go, the list is kept in this browser.
Engaged until the click, with quality balls. If everything works, the first charger is involved: see the dedicated card.
Without toolsToo strong a setting can block the ball. Desser completely, pull a few balls, then take the setting back.
Without toolsCharger removed, battery disconnected, gas or air cut: push the ball towards the chamber with the cleaning rod (definition), never the opposite. Hop-up loosened, it comes out by the charger shaft.
Simple toolsCautionTools: Cleaning upperBall or dust debris retains the following. A cloth soaked in isopropyl alcohol at the tip of the stem, pushed in a single direction.
Simple toolsTools: Cleaning upper, Isopropyl alcoholHe has to step back enough to let the ball go up, then move forward frankly. Split, too short or restrained by a worn flat tablet (definition), it no longer feeds.
DismantlingTools: Precision screwdriver
Stop
Stop and hand over the reply to a technician if:
- The ball does not come out with the rod: do not force, the cocking or the cannon can damage